Capacitor 1.5 µF (R2E097)
1.5 µF Capacitor for the EBM Papst R2E097 Exhaust Fan.
Specifications:
- Frequency: 50/60 Hz
- Voltage: 450V
- Tolerance: +- 5%
- Mounting: flat bottom-metal fixing stud M8x10
- Cable: Unipolar / Bipolar
- Discharge Resistance Plastic Covering
Fan/Blower Compatibility:
- EBM Papst R2E097 Exhaust Fan
Technical Remarks:
Capacitors when they are weak or failing can cause some issues that don't always seem related to a bad capacitor but can be. In general the exhaust / extractor blower fans are split phase-capacitor start. The capacitor will create a 90º phase shift in one of the windings to push and get the motor started moving. When a capacitor gets weak or is weak, it doesn't create enough push or delays it which can cause vibrations. Two magnetic fields close together as inside of a motor without the proper phase shift will vibrate as they oppose each other and it will sit there and shake; causing vibrating noises at start up. So if you have a fan that vibrates on startup but then eventually runs quietly it could be a weak or capacitor that is going bad and not actually the blower motor on the fan. Also a bad capacitor or one with too high of a value can cause the fan to overheat and will shut off or not work.
* Check the Exhaust/Extractor Fan for the proper Capacitor type.
Related Products
Equipment Parts/Electrical Components
Philips X12 Starter
Philips X12 Starters for use in indoor tanning beds using fluorescent lamps. The Philips X12 starter has been replaced by the Philips S12 or Cleo Power starter.
Equipment Parts/Electrical Components
Sunfit E-Power Starter
Sunfit E-Power Electronic Starters, discover the new High Performance E-Power Starter! Sunfit E-Power Starters offer longer life than "glow" starters and lessen blackening of lamp ends.
Equipment Parts/Electrical Components
Ballast - 25W
VS L25 (25W) Electromagnetic Ballast or comparable ballast.